Story Title

Hydroponic Solution

Complete information sheets must accompany each sample and can be downloaded/ printed.
Click here for links to Information Sheets

Please fill in all information on this form if you require interpretation of results and recommendations in the product of your choice.  Let us know if you are concerned about specific problems or symptoms.  This information should be sent with each sample.

Every sample must consist of 500ml of water for each sample. The sample bottle (preferably plastic) must be clean and rinsed at least three times with the sample water before filling and tightly sealing the bottle. Do not use any bottle that has contained fertiliser, concentrated acid or alkaline solutions.

Drip/Feed solution

Collect the nutrient sample from the same site where the sample is collected for infield pH and EC checks. The collection point should be a mix of all irrigations for a full daily period to ensure that the sample is a picture of the whole daily irrigation and not just a single irrigation.

Drain/Waste solution

This will be taken from the collection point where infield assessment of the drainage water for pH, EC and % drainage is taken from. The collection point should be a mix of all irrigations for a full daily period to ensure that the sample is a picture of the whole daily irrigation and not just a single irrigation.

Complete information sheets must accompany each sample and can be downloaded/ printed.
Click here for links to Information Sheets

Water sampling containers can also be provided from Crop Tech upon request.